News
Code of Practice for Wire Mesh Welding Machine
Date:17-08-09, 02:09 AM
Source:
Author:
1. steel mesh welding machine network before turning, in transport should be removed protective cover, protective cover installed, or it may be fatal.
2. not to any part of the body or any object near the touch movement in the organization, such as the Latin American network carriage movement, on the beam, horizontal hoppers, clap mechanism, transmission sprockets, chains, sensors and other bodies, to avoid injury.
3. Do not dangerous voltage conductor portion of the touch and a proximity switch electrical power cabinet, transformer, For debugging detection need professionals.
4. Do not put your hands between the upper and lower electrodes that are being pressed.
5. Do not plug the wire mesh machine control wiring plug, set off the top of the transformer protection board.
6. Do not remove, break the host and the control cabinet on the grounding safety protection line. Check the grounding safety protection cable regularly.
7. When the fuse blowing cabinet, power should be shut down, then isolated from the electrical fuse reason, then replace it with the same type fuse specifications. Otherwise it will cause a fire and burn the device.
8. Do not arbitrarily adjust the device inside the cabinet. Do not put tools, wire and other debris into the electronic control cabinet or on the top of the machine and pull the rack rack.
9. must be timely on the bearings, sliders, chute, slip sets and other parts of the friction filled with lubricating oil, not lack of oil operation. The filling of the lubricating oil should be carried out after the shutdown.
10. Steel mesh wire mesh machine operator for some reason to leave the net welding machine must be shut down power failure, and the main motor speed control knob to a minimum. Long time to leave
Should turn off the power switch, lock the control cabinet, so as not to misuse the others. And should be so that the upper and lower electrode from the contact, shall not stay in the pressure contact state.
